RO Mineral Water Plant

WATER SOFTNER PLANT
A Typical two-bed DM Plant consists of two MS Rubber lined Pressure vessels connected in series along with its internal fittings. The first unit consists of high capacity strongly acidic cation exchange resin, which converts positive ions of salt and replaces them with hydrogen ions to form respective acids, which are absorbed in next vessel by strongly basic anion exchange resin. The water obtained by this process shows conductivity less than 20 µ S / cm at 25 Deg C and total dissolved solids less than 10 ppm. Further high purity water can be achieved by Mixed Bed Deionisers, which are designed to produce high purity treated water. They can be used as polishing units after two bed DM Plant to obtain high purity water. Mixed Bed Deionisers are single column units, filled with strongly acidic cation and strongly basic anion exchange resins mixed together.
View More Details
RO / MINERAL WATER PLANT
The Plant we are offering consist of the followings:
•  Raw Water Pump (2 Nos)
•  Pressure Sand Filter 
•  Activated Carbon Filter
•  Antiscalent Doser
•  5 Micron Cartridge Filter

•  Reverse Osmosis System Consisting of
•  High Pressure Pump
•  Membrane
•  Housing /Pr. Vessel
•  Instruments

•  Chlorine Doser
One Structural FRP Vessel with the plastic non-rusting strainer to providing a supporting bed for the sand / Gravel.

The shell will be designed for working pressure specified and will be tested and made tight under a pressure 50% in excess of working pressure.

Initial equipment is charged with sand and gravel. The sand gravel used are of different size and consists of several level from 1” to 1/8” in diameter.

The water filter will be provided with an inlet distributor comprising of pipe with a strainer to afford a diffused and uniform distribution of incoming water over the entire cross section area of the unit.

One Multiport valve of Plastic will be assembled with the vessel. The unit will be provided with all immediate pipes, valves fittings required for operation.
View More Details
SACHET FILLING & SEALING MACHINE
Fully Automatic From fill and Seal Machine with Photo Electric Control & Piston Filler for packing Liquid. It is an Automatic Form, Fill and Seal pouch packing machine. A lay flat roll is mounted on the machine. Pouch is get formed with the help of the former. The vertical sealing takes place at top sealing rollers and horizontal sealing and cutting takes place at bottom sealing rollers. The sealing type is Hot bar sealing and it is controlled by digital temperature controller on the front panel. The filling system is online cup & Piston Filler. The photo control unit is used to cut the pouch at fix place (photo dot). Batch coding (optional) is done on line on the machine.

Specification:
•  Filling range : 10ml to 500ml Polish Packing
•  Speed : 30 to 35 pouch per minute  
•  Packing material : Heat sealable flexible laminated film
•  Seal type : Four Side / Three Side
•  Filling system : Piston
•  Sealing system : Hot bar

Features :
•  No requirement of Air compressor
•  Require only Single phase power supply
•  Low power consumption
•  SS 304 Covering
•  All the contacts parts made from Stainless Steel
•  Fitted on caster wheel
View More Details
INK JET PRINTER
Most flexible small character inkjet printers on the market today. The state‐of‐the‐art design incorporates the human factor, resulting in an intuitive user 

interface and an advanced print head that requires minimal attention. The result is high‐quality coding and improved productivity through:  

•  Up to 4 lines of variable alphanumeric text, logos and barcodes
•  Print speeds up to 4.4 m/s (880 ft/min)  
•  5, 7, 9, 11, 16 and 24‐dot fonts
•  Up to 60 minutes of printing when fluid cartridges are empty
•  Ultra‐compact molded print head
View More Details
AUTOMATIC BOTTLING PLANT
Rotary Bottle washing machine is compact & highly efficient machine With elegant look. The multi functional , multi featured machines meetsThe GMP requirement of washing for Glass Round Bottles.The machines operates on the principle with “ GENEVA ” mechanism & required manual loading & unloading of the bottles.
View More Details
Automatic Cup Filling & Sealing Machine
View More Details

Or choose by function:

 
 
Close